Ski-Doo REV-XP Summit (2008–2012) Snowmobile Rack

This page covers the REV-XP Summit from 2008 to 2012, including the Summit X, Summit SP and Everest, plus the Summit Sport, which stayed on the REV-XP platform from 2013 to 2016.

Will the Patrol Rack fit?

• Tunnel width: The Patrol Rack (19.25" L x 17" W x 7" H, 2.7 lbs) ships with two widths of mounting hardware, covering tunnels from 14" up to 17".
• Tunnel length: The Patrol Rack needs about 19.5" of clear tunnel behind the seat, so it fits the 154" and 163" versions. On a 146", measure before you order: Ski-Doo changed seats over the years, so some 146" sleds have 19.5" of clear tunnel behind the seat and some don't.
• Good to know: The REV-XP predates Ski-Doo's LinQ system, so the Patrol Rack mounts with no conflict. Installation takes about five minutes: center the rack, drill and bolt it down.

How it mounts

The Patrol Rack through-bolts to your tunnel. Center it, mark the holes, drill and bolt it down. It uses the same mounting points as our earlier Large and Compact racks, so our older install guides still apply.

• Step-by-step install on a REV-XP (146, 154, 163)
• Photos on a 2012 Ski-Doo Freeride 154

What to carry

Add a ski holder or a snowboard holder to each side, and use accessory straps for fuel, a gear bag or a chainsaw in the middle. See the Patrol Rack for details.

Not sure about your sled? Email ben@porttackracks.com with the year, model and track length and we'll confirm the fit before you order.